Gravity Dual-action Airbrush Air Brush Spray Gun Spray Paint Air Hose 0.2mm/0.3mm/0.5mm Needle Nozzle 9cc Model Tattoo Art DIY
Description:
* Double-action technology:
Control of the color and quantity of air with a finger, allows users to determine the quantity of air and fluid released. Provides superb atomization & incredible control. allows you to control color and quantity of air with a finger as you want.
Easy to handle. Light weight die cast for strong power.
* Applications: It sprays an entire range of stipple effects from very fine to coarse textures. Perfect for airbrush, model, paint (car, bicycle, bike, etc.), airbrush tattoos, nail design and much more. Great tool for Commercial arts,illustrations,photo retouching,hobby and crafts. * Including needles and nozzles in 3 size: 0.2mm/ 0.3mm/ 0.5mm, to better satisfy your needs. Parameters:
Material: Copper
Switching Mode: Dual-Action
Nozzle Dia:Airbrush on 0.2mm, parts 0.3mm and 0.5mm.
Standard Nozzle Dia.: 0.2mm.
Cup Capacity: 9cc.
Working Pressure:15-50psi.
Air hose:1.8M
How To Spray:
1.Fill fluid in the cup after thinning appropriately.
2.Hold the airbrush lightly in you hand.
3.By pressing the main lever,a stream of air emerges.Then draw it backward gradually for Color atomization.
4.The spray pattern is in accordance with the distance between a work surface and a air brush.
5.For fine line spray,remove the needle cover and hold the air brush near a work surface.
Kindly Note:
* Please receive airbrush after debugging to the best state, and then use a clean water test, atomization is normal, you can use. * The 0.2mm needle and 0.2mm nozzle are installed in the airbrush gun already.
* Please use the stability, if dropped on the ground, may affect the use effect, or damage.
* After use, please clean the airbrush, avoid clogging, effect the next time you normally use. It will be better to clean with water thinner like Alcohol after water paint. oil paint should be cleaned with oil thinner like ethyl acetate
* In order to protect the item well, a professional person to change needle and nozzle will be recommend.
Maintenance:
1.Empty the fluid cup and wash with water or solvent by a brush.
2.Refill cup with water or solvent,then block the needle cover with a finger and spray.The air flows backward into nozzle to clean the paints remained the air brush.
Problems & Solutions:
1. Paint nozzle leak or abnormal condition of spray.
Possible reason: The needle is bent or distorted.
Solutions: change accessories/parts.
Possible reason: Poor connection of nozzle and needle.
Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net, then use the needle touch the nozzle back and forth; screw tightly the needle chucking net.
2. Could not spray or bad atomization.
Possible reason: nozzle clogged.
Solutions: clean the nozzle by solvent.
Possible reason: the needle chucking net is loose.
Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle and put it back,repeat this action a few times ;screw tightly the needle chucking net.
Possible reason: operation button doesn't work.
Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle and put it back,repeat this action a few times ;screw tightly the needle chucking net.
